1. Fitted with internal ring segments, drilled for assembly of 1 demountable and folded steel surge baffles. Baffle thickness – 3mm steel

2. Valve Box Cabinet on the side for the bottom discharge, complete with lockable door

3. Operational Decal on the inside of the valve box cabinet door

Model Number

Manhole

One Manhole at the rear end of the container DN450 Inside diameter, with bolted cover

Spiral wound gasket (PTFE, SS wound type)

Safety Relief  Valve

1) 1 unit Flange for Safety Relief Valve on top of the tank

2) Size DN50(2inch) equipped with Local brand Relief Valve, Manometer (local brand)

3) Gasket PTFE

Liquid Line

1) 1 unit Flange 2” (DN50) and 1 unit Flange 3’’(DN80) for Internal bottom valve and extra manually operated 2” and 3’’Ball Valve (local brand)

2) Dip Tube to bottom of tank

3) Gasket PTFE

4) Ball valve provided with blind flange and 2’’ and 3’’ ACME coupling with cap

Gas Line

1) 1 unit Flange 2” (DN50) for Internal bottom valve and extra manually operated 2” Ball Valve (Local Brand)

2) Internal mounted stand pipe to gas phase

3) Gasket PTFE

4) Ball valve provided with blind flange

LPG Pump

Adopts CORKEN PUMP 2 INCH CORKEN Z2000 MODEL

Discharging system

1, 10m hose

2, Adopts REGO gun

Liquid control LPG follow meter

LIQUID CONTROL LPG FLOW METER FROM LC WITH MECHANICAL COUNTER PRINTER

Tempreture Gauge

1) 1 unit ( ½” connection or customer’s required size) for temperature gauge;

2) Thermometer range -40 to +100oC and -40 to +212oF, dual scale

Pressure Gauges

1) 1 unit (½” connection or customer’s required size) for pressure gauge connected to the gas phase

2) External DN15 Ball Valve and ¼” pressure gauge 0-40 Bar (local brand)

Liquid Level

1 unit of Rotogauge (local brand)

Drain Valve

1 unit of 2’’ Local brand

Tank is fitted with a sun shield of 2mm aluminum allow (3003) and 50mm heat insulation meterial, prepainted white (equivalent) RAL 9010, covered angle approximately 120o.

Internal tank surface treatment

1.must be free from weld spatters and dirt  

2. All surfaces shot blasted to SA 2 ½

External tank surface treatment

1. Shot blasting to SA 2 ½  

2. Primer Coat -   30 microns DFT

3. Intermediate Coat –  40 microns DFT

4. Top Coat – 50 microns DFT, color white RAL 9010

Frame Surface Treatment

1. Shot blasting to SA 2 ½

2. Primer Coat -  30 microns DFT

3. Intermediate Coat – 40 microns DFT

4. Top Coat – 50 microns DFT, color to be defined by South Pacific Inc.

1. All markings in line with Code requirements, including regulatory markings, letterings must be included

2. Tank Nameplate must incorporate Technical design specification including manufacturer serial numbers.